This last-generation handpiece is the result of our ongoing research and development work. PM 1:1 is designed to withstand the stresses resulting from repeated lateral pressure, while maintaining exceptional precision. You will appreciate the absence of vibration, quiet operation and tried and tested bur locking system.
This last-generation handpiece is the result of our ongoing research and development work. PM 1:1 is designed to withstand the stresses resulting from repeated lateral pressure, while maintaining exceptional precision. You will appreciate the absence of vibration, quiet operation and tried and tested bur locking system.
Micro-Series. Welcome to a New Dimension.
Bien-Air’s new generation Micro-Series models ally innovation with compact design, resulting in improved power and maneuverability. Up to 30% shorter and 23% lighter than traditional models, they have an easy grasp that allows for optimal work comfort with less strain on the hand, arm, and shoulder.
| PM 1:1 Micro-Series | PM 1:1 Standard | |
|---|---|---|
| Type | Straight handpiece with internal spray | Straight handpiece |
| Ratio | 1:1 (direct) | 1:1 (direct) |
| Coupling | Compatible with Micro-Series | E-type as per ISO 3964 |
| Locking system | Locking ring | Locking ring |
| Bur dimension | Bur shank Ø 2.35 mm | Bur shank Ø 2.35 mm |
| Cleaning / sterilisation | Thermal washer / steam autoclave up to 135°C (275°F) | Thermal washer / steam autoclave up to 135°C (275°F) |
| Irrigation | – | Internal |
| Warranty | 2 to 3 years 1 | 2 to 3 years 1 |
| Reference | PM 1:1 Micro-Series 1600693-001 | PM 1:1 Standard 1600383-001 |
PREPARATION
A.REMOVING THE INSTRUMENT
Remove the rotary instrument from the chuck mechanism
Disconnect the contra-angle from the motor
B.PRE-DISINFECTION
External disinfection
Do not immerse the instrument in a disinfectant bath.
CLEANING
B.REMOVING DIRT/DEPOSITS
Carefully remove all traces of dirt or deposits from the nozzles using the Bien-Air cleaning wire
Dry the nozzles with compressed air then dry the rest of the instrument with a cloth
Do not immerse in an ultrasonic cleaner
C.INTERNAL AND EXTERNAL CLEANING WITH SPRAYNET
Shake the Spraynet before use
Use the Spraynet attachment 1
Keep the tip of the instrument pointing down and protect with an absorbent cloth; press the Spraynet button down for 1 second
Clean the exterior of the contra-angle with a cloth soaked in Spraynet
DISINFECTION
A.DISINFECTION USING SURFACE DISINFECTANT (follow the manufacturer’s instructions for use)
Do not immerse the instrument in a disinfectant bath
OR
LUBRICATION
A.LUBRICATION WITH LUBRIFLUID
Shake the Lubrifluid before usen
Use the Lubrifluid attachment 1
Keep the tip of the instrument pointing down and protect with an absorbent cloth; press the Lubrifluid button down for 1 second
Then, run an operating test for 30 seconds at low speed to remove any surplus lubricant
Store immediately: store the instruments with the tip pointing downwards so that any oil residues can flow out
STERILISATION
B. STERILISE IN ACCORDANCE WITH THE MANUFACTURER’S INSTRUCTIONS
Instruments bearing the “135°C” can be sterilised in an autoclave
Only sterilise instruments which have been cleaned and lubricated
Reviews
There are no reviews yet.