Handpieces with interchangeable heads and contra-angles with detachable cups are the only instruments that can be fitted to motors rotating at 40,000 rpm. Apart from superior comfort and extended service life,Bien-Air prophylaxis instruments in particular offer high resistance to brasive cleaning pastes and can withstand constant and repeated sterilizations.
Handpieces with interchangeable heads and contra-angles with detachable cups are the only instruments that can be fitted to motors rotating at 40,000 rpm. Apart from superior comfort and extended service life,Bien-Air prophylaxis instruments in particular offer high resistance to brasive cleaning pastes and can withstand constant and repeated sterilizations.
| CAP 15:1 | |
|---|---|
| Type | Contra-angle without light or spray, screw or clip cup interchangeability |
| Ratio | 15:1 (speed reducing factor of 15) |
| Cleaning / sterilisation | Thermal washer / steam autoclave up to 134°C (273°F) |
| Warranty | 2 to 3 years 1 |
| Reference | CAP 15:1 1600290-001 |
PREPARATION
A.REMOVING THE INSTRUMENT
Remove the rotary instrument from the chuck mechanism
Disconnect the contra-angle from the motor
B.PRE-DISINFECTION
External disinfection
Do not immerse the instrument in a disinfectant bath.
CLEANING
B.REMOVING DIRT/DEPOSITS
Carefully remove all traces of dirt or deposits from the nozzles using the Bien-Air cleaning wire
Dry the nozzles with compressed air then dry the rest of the instrument with a cloth
Do not immerse in an ultrasonic cleaner
C.INTERNAL AND EXTERNAL CLEANING WITH SPRAYNET
Shake the Spraynet before use
Use the Spraynet attachment 1
Keep the tip of the instrument pointing down and protect with an absorbent cloth; press the Spraynet button down for 1 second
Clean the exterior of the contra-angle with a cloth soaked in Spraynet
DISINFECTION
A.DISINFECTION USING SURFACE DISINFECTANT (follow the manufacturer’s instructions for use)
Do not immerse the instrument in a disinfectant bath
OR
LUBRICATION
A.LUBRICATION WITH LUBRIFLUID
Shake the Lubrifluid before usen
Use the Lubrifluid attachment 1
Keep the tip of the instrument pointing down and protect with an absorbent cloth; press the Lubrifluid button down for 1 second
Then, run an operating test for 30 seconds at low speed to remove any surplus lubricant
Store immediately: store the instruments with the tip pointing downwards so that any oil residues can flow out
STERILISATION
B.
STERILISE IN ACCORDANCE WITH THE MANUFACTURER’S INSTRUCTIONS
Instruments bearing the “135°C” can be sterilised in an autoclave
Only sterilise instruments which have been cleaned and lubricated
Reviews
There are no reviews yet.