Simplicity. The cornerstone of the new range of implant and oral surgery motors developed by Bien-Air Dental. General dental practitioner or experienced surgeon, are you seeking a fast, simple and efficient solution for your implant dentistry procedures? Look no further than the Chiropro. Your perfect solution for precise and smooth placement of implants.
THE 7 ESSENTIAL CHARACTERISTICS OF NEW CHIROPRO.
| Chiropro 3rd Gen | Chiropro L | iChiropro | |
|---|---|---|---|
| Control Knob (sterilisable) | ✓ | – | – |
| Implant placement | ✓ | ✓ | ✓ |
| Built-in surgical procedures | – | ✓ | ✓ |
| Surgical protocols | – | 8 | >300 |
| Guided surgery protocols | – | – | ✓ |
| Digital workflow (import data from planning software CodiagnostiXTM) | – | – | ✓ |
| Exportable surgical report | – | – | ✓ |
| Max. Torque at the rotary instrument in implant mode | 70 Ncm | 55 Ncm | 70 Ncm |
| Dimensions L x W x H | 240mm x 240mm x 102mm | 309mm x 220mm x 123mm | 242mm x 244mm x 102mm |
| Weight | 2,2 Kg | 2,7 Kg | 2,8 Kg |
| Device warranty | 2 to 3 years 1 | 2 years | 2 to 3 years 1 |
| MX-i specifications | MX-i LED 1601008-001 Non self-ventilated |
MX-i LED 1600755-001 Self-ventilated |
MX-i LED 1600755-001 Self-ventilated |
| Micromotor Dimensions ø x L | 23 x 83mm | 23 x 91mm | 23 x 91mm |
| Micromotor Weight | 110g | 115g | 115g |
| Reference | Chiropro 3rd Gen set without CA 1700708-001Chiropro 3rd Gen set with Micro-Series CA 20:1 L 1700707-001 |
Chiropro L set with CA 20:1 L 1700307-001Chiropro L set without CA 1700298-001 |
iChiropro set with Micro-Series CA 20:1 L 1700440-001iChiropro set without Micro-Series CA 20:1 L 1700439-001 |
CLEANING
A.INTERNAL CLEANING
Rinse the interior of the piece under running water at &tl;38°C
B.EXTERNAL CLEANING
Clean the exterior of the piece under running water at <38°
DISINFECTION
Do not immerse the instrument in a disinfectant bath
OR
STERILISATION
A.PLACE THE MOTOR IN A STERILISATION BAG
B.
TERILISE IN ACCORDANCE WITH THE MANUFACTURER’S INSTRUCTIONS
Instruments bearing the “135°C” symbol can be sterilised in an autoclave
PREPARATION
A.REMOVING THE INSTRUMENT
Remove the rotary instrument from the chuck mechanism
Disconnect the contra-angle from the motor
B.PRE-DISINFECTION
External disinfection
Do not immerse the instrument in a disinfectant bath.
CLEANING
A.CLEAN UNDER RUNNING WATER AT <38°C
B.REMOVING DIRT/DEPOSITS
Carefully remove all traces of dirt or deposits from the nozzles using the Bien-Air cleaning wire
Dry the nozzles with compressed air then dry the rest of the instrument with a cloth
Do not immerse in an ultrasonic cleaner
C.INTERNAL CLEANING WITH AQUACARE
Shake the Aquacare before use
Use the Aquacare attachment 1
Keep the tip of the instrument pointing down and protect with an absorbent cloth; press the Aquacare button down for 2 seconds
Use the Aquacare attachment 3
Keep the tip of the instrument pointing down and protect with an absorbent cloth; press the Aquacare button down for 1 second
D.INTERNAL AND EXTERNAL CLEANING WITH SPRAYNET
Shake the Spraynet before use
Use the Spraynet attachment
Keep the tip of the instrument pointing down and protect with an absorbent cloth; press the Spraynet button down for 1 second
Clean the exterior of the contra-angle with a cloth soaked in Spraynet
DISINFECTION
A.DISINFECTION USING SURFACE DISINFECTANT (follow the manufacturer’s instructions for use)
Do not immerse the instrument in a disinfectant bath
OR
B.THERMAL DISINFECTION (follow the manufacturer’s instructions for use)
LUBRICATION
A.LUBRICATION WITH LUBRIFLUID
Shake the Lubrifluid before use
Use the Lubrifluid attachment 1
Keep the tip of the instrument pointing down and protect with an absorbent cloth; press the Lubrifluid button down for 1 second
Then, run an operating test for 30 seconds at a low speed to remove any surplus lubricant
Store immediately: store the instruments with the tip pointing downwards so that any oil residues can flow out
STERILISATION
A.PLACE THE CONTRA-ANGLE IN A STERILISATION BAG
B.
STERILISE IN ACCORDANCE WITH THE MANUFACTURER’S INSTRUCTIONS
Instruments bearing the “135°C” symbol can be sterilised in an autoclave
Only sterilise instruments which have been cleaned and lubricated
Reviews
There are no reviews yet.